How to solve the four simple failures of peristaltic pump
2022-05-30
With the rapid development of peristaltic pumps, more and more industries with liquid transmission needs have been used, but in the use process, because of the unfamiliar with the pump, or other reasons caused by the use of problems, how to solve? Here to share with you. 1. No response after startup If there is no response after the Peristaltic Pump is powered on, check it in the following order. If there is still no response after checking, you can send a private message. If circuit protection is installed, make sure the circuit does not trip Make sure the power plug is inserted into a working socket Check whether the power cable is firmly inserted Check whether the fuse of the power interface is blown 2. The pump is started but cannot run First, you can check whether the coupling is damaged, if not, please cut off the power supply, manually turn the pump head, and dial the roller, whether the rotation is normal. 3, the pump transmission flow is low or no flow For example, if the flow rate is set to 0.1ml, the roller hardly moves. Set the flow rate to a higher one during the test. Secondly, you can also follow the following steps to check. Check whether the material supply is normal Check whether pipes are twisted or blocked Check that all valves are open Check that the hose is located in the middle of the rotor Check whether the hose is cracked or damaged Viewing the Running Direction Check whether the pump head rotor can rotate flexibly 4. External control cannot be controlled Regardless of the digital display type or LCD type, you can see whether the external control icon has been successfully switched on the screen. If yes, you can check whether the external control cable is correctly connected and whether the signal source Settings are normal. The above is a simple solution to the problem, if there is no solution, you can also contact us: www.crpump.com,support@crpump.com,15633705132